Every Thing About Android Development Related To Galaxy Mini

UPGRADE GALAXY MINI/POP TO GIGERBREAD 2.3.6

UPGRADE GALAXY MINI/POP TO GIGERBREAD 2.3.6


Download Rom Through Zippyshare(Secure Fast Downloading)






                 DO THIS AT YOUR OWN RISK

Please follow through the steps carefully to successfully upgrade your Galaxy Pop to Gingerbread 2.3.6. Also, note that there is a (slight) possiblilty of getting your device bricked, so all I can say is Do It At Your Own Risk. However, I have tried this with my own phone and luckily my device is safe and currently running this very update. So, let's get started.

You have to download this necessary files and software required for upgrading to Gingerbread. Please, download the files from below:

1. Odin Multi Downloader v4.38 for GTS5570

2.Tass.ops

3.Gingerbread 2.3.6 (Indian version, GT-S5570_INU_S5570DDKQ7_S5570ODDKQ6_S5570DDKQ7.rar ) (Resume able download)

OR, Mirror download from HotFile.

Password to extract the rar is  'sampro.pl' without quotes.

Okay, those were the files needed to upgrade your Galaxy pop to Android v2.3.6. Now that you have got the file extract it with the password above to get the file named S5570DDKQ7_S5570ODDKQ6_S5570DDKQ7_HOME.tar.md5 (this is the file that we will be using in the process). After you have got required files put them at a place (folder) and then

follow the steps given below:

1.Charge your phone and personal computer to full charge (at least above 60%-70%) to avoid any issues during upgrade. (Note: If you don’t upgrade properly you might even brick your phone.)

2.Run S5570_Odin Multi Downloader v4.38 application on your PC.

3.Click OPS button and select Tass_v1.ops file downloaded earlier.

Select/Tick One Package Option (Don’t Check/Uncheck others, leave them as they are.)

4.Click One Package button and select the S5570DDKQ7_S5570ODDKQ6_S5570DDKQ7_HOME.tar.md5 file you extracted earlier from your download.

[Optional, but recommended to avoid boot loops after flashing] Reboot your device to recovery mode (Press Home + Power buttons)  and then select Wipe data/factory reset and Wipe cache option.

5.Power off your phone and boot it in Download Mode (Press Home + Volume Down + Power Button at the same time).

6.If you see a yellow triangle icon with Downloading written inside it (that's our download mode) then connect your galaxy pop to your pc via USB.

If odin detects your phone it will show COM Port # (Port Number) written in yellow background on its window (see image below).

7.If everything above went well click Start Button to proceed then wait till it finishes (approx. 5.30 minutes) and reboots your phone.

8.When Odin says PASS close the application and disconnect your phone.

That's it after Odin says PASS in the upper top right box you may close Odin and disconnect your device. Here are few things to keep in mind during the whole process.

9.If you get any error such as Can't Open USB Serial Port, then make sure Samsung Kies is closed (disabled). Also, another reason for this error is you don't have Samsung USB Drivers installed. If that is the case please install them from this link.

Once you press Start in Odin don't disconnect your device until it says PASS.

10.There is a high probability that your device will not boot successfully just after flashing. If this is the case wait till Odin says PASS and then (close Odin and) shut down your Galaxy Pop (press Power button for a long time or remove battery). Now, Go to Recovery Mode (Press Home + Power buttons)  and then select Wipe data/factory reset and Wipe cache option and then reboot your device.

LIKE THIS ...?

THEN PLZ SHARE IT..

ANY PROBLEM THEN COMMENT BELOW!!

Published with Blogger-droid v2.0.4

Download Rom Through Mediafire(Secure Fast Downloading)



share this article to: Facebook Twitter Google+ Linkedin Technorati Digg
Posted by Yash Gohel, Published at 8:29 PM and have 0 comments